You’ve to do some reentering in your living room, so you move your sofa. Underneath it, find… a furniture mark!
We understand if you’re hesitant to try something new, but before you write this idea off, hear us out.
Here’s how you can remove those pesky marks on your textile floor covering:
- If you have a carpet that has been damaged by furniture,
- Do you want to know how to remove a dent?
- Looking to avoid these mistakes in the future?
If you want to know more, keep reading!
This article will answer all of your questions regarding how to get furniture marks out of the carpet.
Why Do Carpeted Floors Develop Dents?
If you leave a heavy piece of furniture on your carpet for too long, the weight will eventually deform the fibers.
The more time an item, such as a sofa, sits on your carpet, the deeper and more pronounced the marks become.
Fortunately, these dents are not permanent.
How Can I Repair the Carpet Myself?
Each carpet type requires unique methods to remove dents depending on its fabric.
What is practical for synthetic floor coverings may not work for rugs made of natural fibers.
Before progressing, always check the label on your carpet to determine its material.
With that said, here are a few techniques to get furniture foot marks out of your lovely carpet:
How to Remove Dents from Synthetic Carpets?
You can quickly restore your carpet by using ice cubes to eliminate dents!
All you need is 30 minutes and a few ice cubes.
But if this does not work you can always contact a professional carpet cleaning service at Dan’s Van Water Damage Solutions.
These steps will help you get deep marks out of a synthetic rug:
- Move the furniture away from the stain on the carpet.
- To treat the dents, you need access.
- Keep the subfloor in pristine condition.
- Place a few towels or old pieces of cloth underneath the dented areas you plan on repairing.
The fabric will absorb the water from the melting ice cubes.
- Fill the indentations in the ice cube tray with water.
- The melting process will cause the marked areas to absorb the moisture and swell up, gradually making the dents disappear.
To avoid potential color-reaction problems with your fabric, do a spot test first.
- Place the ice in the freezer overnight or for two hours.
- The carpet needs time to absorb the water and fluff up.
- Blot the areas you treated.
- Using a clean towel, blot the rug until most of the water is gone.
You won’t get it perfectly dry, but try to remove as much moisture as possible.
It’s always good to leave your carpet dry.
- To fluff the carpet fibers, use your fingers or a small brush.
You won’t see any evidence of your old furniture once you’re done with regular or flood cleanup.
Standard synthetic carpets are made from polyester, nylon, or olefin fiber.
How to Remove Dents from Natural Fiber Carpets?
Using steam is the best way to eliminate indentations in a natural-fiber rug.
Always check the label on your carpet to know which materials you are working with.
Here is how to remove furniture marks from carpets made out of natural fibers:
- Start moving any furniture in the dented area to fix your rug.
- Put some towels under the carpet to protect your floor from moisture.
- Fill your steam iron with water and set it to the highest heat setting.
- Once it reaches the correct temperature, hold the appliance 10 to 15cm away from the carpet and apply steam.
- Continue steaming until the fibers are wet and hot.
- Be careful to avoid touching the iron directly with the rug.
- Once the area is wet, allow it to dry until the moisture is gone.
- In the morning, lightly fluff the fibers to return them to their original form.
If you don’t have a steam iron, don’t fret.
Here is what you can do:
Wet the dents on your carpet with some water.
After the area is moist, grab a hair dryer and hold it about 10-15 cm away from the rug’s surface.
Put the dryer on high and blast heat onto the wet area until you see steam coming off or feel that the carpet is warm.
If you have a difficult dent to remove from your carpet, try using heat.
Get a tea towel and soak it in warm water.
After squeezing the excess liquid, put the wet towel over the mark.
Set your iron on medium and run it over the towel while applying slight pressure after it has heated up.
After you finish, unplug the iron and let the area dry for at least 12 hours.
Use your fingers, a spoon, or a brush to plump the fibers and return them to their original state.
Some standard natural carpet fibers are wool, sisal, and cotton.
Remove All the Dents in Your Carpet by Using a Professional Cleaning Service
If the idea of preparing towels, playing with irons, hair dryers, and all that doesn’t appeal to you, get a professional carpet cleaner to remove the dents.
At Dan’s Van Water Damage Solutions, we are experts at restoring furniture and rugs damaged by water.
We guarantee that any marks or stains will be removed, and your carpet will look new again.
The hot water extraction method is not only the most efficient but also the longest-lasting rug cleaning treatment.
Not to mention, it can also restore any heavily soiled carpet to its original condition.
Plus, it removes all sorts of existing furniture marks and dents!
Contact us and we are always here to assist you in how to get furniture marks out of the carpet.
