Dan's Van Water Damage Solutions
Serving Queens With 24/7 Service


How To Get Mold Out Of Carpet

If you have mold in your carpeting, you need to tackle it immediately to keep it from growing and affecting your health and your home’s environment.

Mold is easy enough to remove from walls, furniture, and other hard surfaces, but fibrous surfaces such as carpets are trickier to deal with.

A professional rug and carpet maintenance company is better equipped with the tools and skills to remove molding at a granular level.

However, knowing how to get mold out of carpet is helpful, especially if you need urgent cleaning.

At Dan’s Van Water Damage Solution, we have experts on carpet restoration just a call away for your mold and mildew, leakage, and flood cleanup needs.

Let us know what you need—and in the meantime, why don’t you take a look at these simple tips for mold-free carpeting?

Dish Soap & Water

This is the easiest, most accessible solution for mold in your carpeting—but you should know that dish soap is only effective for low to mild mold buildup, not heavier infiltrations.

It’s a simple carpet or rug cleaner; mix one tablespoon of dishwashing liquid with one cup of warm water ( you can use hot water for better effectiveness, but it may discolor a bright carpet).

For rugs, you can use a washing machine, but for carpeting, you’ll need a brush to scrub in the solution.

If the mold is older and more deep-set, let the dish soap solution in for 15-20 minutes before scrubbing.

Wipe off the residue with a clean, damp rag afterward, and leave it to air dry—preferably using a wet vacuum to suction all the moisture.

Vinegar & Baking Soda

If you need a natural carpet cleaner for severe mold contaminations, vinegar and baking soda are both easily found in the kitchen and do cost a lot.

To clean the mold, first, soak the area with vinegar for at least an hour.

Create a thick baking soda paste using warm water, and spread it out over the mold area.

Let this sit for another hour, use a brush to loosen the mold, and vacuum up the residue.

This method is effective in containing the spread of mold—if not eliminating it altogether.

Also, it will help in getting rid of the odor that comes with strong mold contamination.

Store-Bought Anti-Fungal Treatment

Anti-mold (also called anti-fungal) sprays are effective in controlling and killing mold from carpets and rugs.

This is a leave-in carpet treatment of sorts that not only eliminates mold but also creates a barrier that limits the spread of any remaining contamination.

To use the anti-mold treatment, spray the affected and a few inches of the surrounding area.

Blot with a clean, dry rag, and let it dry before walking over it.

Make sure that your treatment is made specifically for carpet mold.

Any other type of anti-fungal treatment may be too strong for the carpet and may cause fraying and fading.

If you find this method difficult to try.

No worries; get in touch with our team now and we will be right there to get mold out of your carpet.

Steam Cleaning

Heat is found to be effective in killing mold and mildew, which is why a steam vacuum is an ideal and safe carpet cleaner.

Use a good-quality steam cleaner on the affected area, and cover each spot for at least 12-15 seconds.

Check out this video for a brief tutorial.

Not only let the moisture from the steam treatment sit in afterward, as it may encourage new mold.

Dry it with a wet vacuum immediately and keep the area well-ventilated for a while.

Steam cleaning also works well for floor mats in cars, as these see a lot of dirt and moisture.

Thus, they also need routine cleaning.

HEPA Vacuum Cleaning

A HEPA Vacuum Cleaner is specially designed to target fungal spores and remove contamination.

HEPA vacuums are also used by professional carpet and rug cleaners, along with other products.

However, these vacuum cleaners are expensive, so renting one is a cost-effective way of treating your carpet’s molding at home.

This vacuum cleaner will completely filter out mild to severe mold infestations in carpeting.

Therefore preventing future mold buildup as well.

The use of state-of-the-art equipment with the skill to identify and clean each mold spore is the reason why you need an expert’s help for leakage or flood cleanup in your home.

Dan’s Van Water Damage Solutions To Your Carpet’s Rescue

As a carpet cleaning company, we have access to the treatments and tools to tackle mold and mildew in your carpets and rugs.

We also offer services for carpet and rug restoration.

Whether your carpet has dirt or dust buildup, staining, and other various environmental damages.

These tips on how to get mold out of the carpet will help you clean up moderate mold contaminations.

However, if the infestation has reached the carpet backing, it’s time to reach out to the experts.

Call us today and get your carpets restored back to new!

Rate this post



    Carpet and Rug Cleaning Company Costs in Rosedale, Queens

    Contact Us

    Contact Tel:



    Mon - Fri 6:00am - 6:00pm

    We look forward to helping you right away.

    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar